SensorCatalog

R 1/4 thread dimensions

ISO 7-1 (BSPT) · Taper 1:16 · 55°

Dimensions

Major diameter
13.157 mm0.5180 in
Pitch
1.337 mm19 TPI
Thread height
0.856 mmbasic profile, before tolerances
Standard
ISO 7-1 (BSPT)
Form
Taper 1:16
Flank angle
55°
Seals on
Thread + sealant
Used for
Process connections

For taper threads the diameter is the nominal pipe outside diameter used for identification; the thread diameter changes along the length at a taper of 1:16.

Check a measurement against this thread

Assembly and gauging

Gauge length
6.0 mm±1.3 mm (±1 turn), external thread
Useful thread length
9.7 mmminimum, external thread at nominal gauge length
Fitting allowance
3.7 mm2¾ turns
Pitch diameter at gauge plane
12.301 mmISO 7-1

From ISO 7-1:1994, table 1. On the internal thread (Rc) the gauge plane may lie ±1.7 mm (1¼ turns) from basic. R external threads seal in Rc taper or Rp parallel internal threads, with sealant on the thread.

Thread profile

55°P 1.337 mm · 19 TPI

Schematic: flank angle and pitch-to-depth proportions to scale.

Easily confused with

ThreadStandardMajor diameterFlankSeals on
G 1/4ISO 228-1 (BSPP)same diameter; same pitch55°Gasket / O-ring

Need a sensor with a specific process connection or thread adapter?

Contact us

↑ ↓ choose · Enter open · Esc close