3/4 NPT thread dimensions
ASME B1.20.1 · Taper 1:16 · 60°
Dimensions
- Major diameter
- 26.670 mm1.0500 in
- Pitch
- 1.814 mm14 TPI
- Thread height
- 1.451 mmbasic profile, before tolerances
- Standard
- ASME B1.20.1
- Form
- Taper 1:16
- Flank angle
- 60°
- Seals on
- Thread + sealant
- Used for
- Process connections and cable entries
For taper threads the diameter is the nominal pipe outside diameter used for identification; the thread diameter changes along the length at a taper of 1:16.
Assembly and gauging
- Hand-tight engagement L1
- 8.611 mm0.3390 in · about 4.5 turns by hand
- Wrench make-up L3
- 5.443 mm0.2143 in · 3 threads: about 3 more turns with a wrench
- Effective thread length L2
- 13.861 mm0.5457 in · external thread
- Pitch diameter at hand-tight plane E1
- 25.117 mm0.9889 in
- Pitch diameter at small end E0
- 24.579 mm0.9677 in
Basic dimensions from ASME B1.20.1. Male and female threads may each be up to one turn off basic, so the engagement you get varies by about ±1 turn per part; a joint that takes far fewer turns by hand points to a worn or wrong thread.
Thread profile
Schematic: flank angle and pitch-to-depth proportions to scale.
Need a sensor with a specific process connection or thread adapter?
Contact us