R 1/2 thread dimensions
ISO 7-1 (BSPT) · Taper 1:16 · 55°
Dimensions
- Major diameter
- 20.955 mm0.8250 in
- Pitch
- 1.814 mm14 TPI
- Thread height
- 1.162 mmbasic profile, before tolerances
- Standard
- ISO 7-1 (BSPT)
- Form
- Taper 1:16
- Flank angle
- 55°
- Seals on
- Thread + sealant
- Used for
- Process connections
For taper threads the diameter is the nominal pipe outside diameter used for identification; the thread diameter changes along the length at a taper of 1:16.
Assembly and gauging
- Gauge length
- 8.2 mm±1.8 mm (±1 turn), external thread
- Useful thread length
- 13.2 mmminimum, external thread at nominal gauge length
- Fitting allowance
- 5.0 mm2¾ turns
- Pitch diameter at gauge plane
- 19.793 mmISO 7-1
From ISO 7-1:1994, table 1. On the internal thread (Rc) the gauge plane may lie ±2.3 mm (1¼ turns) from basic. R external threads seal in Rc taper or Rp parallel internal threads, with sealant on the thread.
Thread profile
Schematic: flank angle and pitch-to-depth proportions to scale.
Need a sensor with a specific process connection or thread adapter?
Contact us