SensorCatalog

Pressure ↔ altitude calculator

Barometric pressure and altitude in the ISA standard atmosphere, from −500 to 11 000 m.

In the ISA standard atmosphere 1000 m corresponds to 898.7 hPa and 8.5 °C; 700 hPa corresponds to about 3012 m. Real weather moves the pressure by tens of hPa, so altimeters are set to the local QNH.

Convert

Result

ISA temperature
15.00 °C288.15 K
Lapse rate
6.5 K/km6.5 K per km in the troposphere
Sea-level reference
1013.250 hPa15.00 °C · ISA
Valid altitude
-500 … 11000 mtroposphere only

Schematic

Pressure / hPa1013226011 000 mAltitude / mh0.0 mP1013.250 hPa
Drawn from the inputs above; not to scale.
Formulas and standards
P = P₀ · (1 − L·h / T₀)^(g/(R·L))   h = (T₀/L) · (1 − (P/P₀)^(L·R/g))

The International Standard Atmosphere is a model, not the weather: P = P₀·(1 − L·h/T₀)^(g/(R·L)) with P₀ = 101 325 Pa, T₀ = 288.15 K, L = 0.0065 K/m, g = 9.80665 m/s² and R = 287.05 J/(kg·K). The exponent g/(R·L) is 5.25588; the guide values often quote 5.255, which differs by about 0.2 hPa at 5 km. The inverse returns the altitude for a pressure on the same curve.

This is the troposphere model, from −500 m to 11 000 m. Above the tropopause the temperature stops falling and the stratosphere formula applies. Real pressure also varies with the weather by tens of hPa: a barometer reading needs the local sea-level pressure (QNH) to give a meaningful altitude, and an altimeter is set to the current QNH for the same reason.

Looking for barometric pressure sensors or transmitters?

Contact us

What the ISA model gives

The International Standard Atmosphere is a reference model of how pressure and temperature change with altitude. In the troposphere, the lowest 11 km, the temperature falls 6.5 K per kilometre from 15 °C at sea level, and the pressure follows a power law. Meteorology, aviation and pressure-sensor calibration all use it, so a pressure can be turned into a nominal altitude and back without any weather data.

The equations

  • P = P₀ · (1 − L·h / T₀)^(g/(R·L))
  • h = (T₀/L) · (1 − (P/P₀)^(L·R/g))

with P₀ = 101 325 Pa, T₀ = 288.15 K, L = 0.0065 K/m, g = 9.80665 m/s² and R = 287.05 J/(kg·K). The exponent is 5.25588; tables that print 5.255 are rounded and differ by about 0.2 hPa at 5 km. The calculator uses the exact value and shows the standard temperature at the altitude.

Worked example

At sea level the pressure is 1013.25 hPa and the temperature 15 °C. At 1000 m the model gives 898.7 hPa and 8.5 °C; at 5000 m, 540.2 hPa at −17.5 °C; at 11 000 m, 226.3 hPa at −56.5 °C. Going the other way, 700 hPa corresponds to about 3012 m.

A practical check: pressure falls by roughly 1 hPa per 8 m near sea level, which is why a barometer can resolve a floor of a building but not a weather forecast without care.

Why the weather matters

The ISA is a standard day, not today. Real sea-level pressure moves between about 950 and 1050 hPa with the weather, so the same barometer reads different pressures at the same altitude on different days. An altimeter is therefore set to the local QNH; a pressure sensor used as an altimeter needs the same reference. For indoor positioning, a fixed reference sensor at a known altitude is the usual way to cancel the weather.

Where it is used

  • Pressure sensors and barometers: converting a reading to a nominal altitude for test and calibration.
  • Altimeters and drones: the ISA relation behind the pressure altitude, with QNH correction.
  • Weather and HVAC: reducing a station pressure to sea level (QNH), and checking the pressure range a sensor needs at a given site.
  • Compressed air and gas flow: standard conditions and absolute pressure change with altitude; the gas flow converter uses the absolute pressure you enter, which for a site at altitude is lower than at sea level.

The pressure converter changes hPa into bar, psi and the other pressure units.

Common mistakes

Using the ISA as the actual weather. A pressure reading at a known altitude gives the ISA altitude only if the sea-level pressure happens to be 1013.25 hPa.

Mixing gauge and absolute pressure. The model is for absolute pressure; a gauge reading must have the local atmospheric pressure added.

Using the troposphere formula above 11 km. The temperature stops falling there; another formula applies.

Forgetting the temperature at altitude. The ISA temperature is part of the model; actual air is often warmer or colder, which shifts the pressure for a given height.

Frequently asked questions

What is the pressure at 1000 m?

898.7 hPa in the ISA, where the temperature is 8.5 °C. Real weather moves that by tens of hPa.

What is the altitude for 700 hPa?

About 3012 m in the ISA model. The inverse is exact for the model, not for the day’s atmosphere.

Why does my barometer disagree with the airport?

The airport reports QNH (sea-level pressure), while the barometer reads station pressure. The difference is the pressure of the air column below the station.

Is pressure altitude the same as GPS altitude?

No. Pressure altitude follows the ISA from the measured pressure; GPS gives a geometric altitude. They differ with the weather and with the local gravity field.

↑ ↓ choose · Enter open · Esc close