SensorCatalog

1 NPT thread dimensions

ASME B1.20.1 · Taper 1:16 · 60°

Dimensions

Major diameter
33.401 mm1.3150 in
Pitch
2.209 mm11.5 TPI
Thread height
1.767 mmbasic profile, before tolerances
Standard
ASME B1.20.1
Form
Taper 1:16
Flank angle
60°
Seals on
Thread + sealant
Used for
Process connections

For taper threads the diameter is the nominal pipe outside diameter used for identification; the thread diameter changes along the length at a taper of 1:16.

Check a measurement against this thread

Assembly and gauging

Hand-tight engagement L1
10.160 mm0.4000 in · about 4.5 turns by hand
Wrench make-up L3
6.626 mm0.2609 in · 3 threads: about 3 more turns with a wrench
Effective thread length L2
17.343 mm0.6828 in · external thread
Pitch diameter at hand-tight plane E1
31.461 mm1.2386 in
Pitch diameter at small end E0
30.826 mm1.2136 in

Basic dimensions from ASME B1.20.1. Male and female threads may each be up to one turn off basic, so the engagement you get varies by about ±1 turn per part; a joint that takes far fewer turns by hand points to a worn or wrong thread.

Thread profile

60°P 2.209 mm · 11.5 TPI

Schematic: flank angle and pitch-to-depth proportions to scale.

Easily confused with

No other thread in the reference table has a pitch within 4 % and a diameter within 1.5 mm of this one.

Need a sensor with a specific process connection or thread adapter?

Contact us

↑ ↓ choose · Enter open · Esc close