SensorCatalog

Gewindemaße

Gewinde für Prozessanschlüsse und Kabeleinführungen mit ihren Normmaßen und ihrer Abdichtung. NPT (60°-Flanke, ASME B1.20.1) und BSPT (55°-Flanke, ISO 7-1) sind nicht austauschbar: bei 1/2 Zoll haben beide 14 TPI, aber Flankenwinkel und Durchmesser unterscheiden sich, sie klemmen also, ohne zu dichten.

GewindeNormFormAußen-Ø (mm)TPISteigung (mm)Flanke
G 1/8ISO 228-1 (BSPP)Zylindrisch9,728280,90755°
G 1/4ISO 228-1 (BSPP)Zylindrisch13,157191,33755°
G 3/8ISO 228-1 (BSPP)Zylindrisch16,662191,33755°
G 1/2ISO 228-1 (BSPP)Zylindrisch20,955141,81455°
G 3/4ISO 228-1 (BSPP)Zylindrisch26,441141,81455°
G 1ISO 228-1 (BSPP)Zylindrisch33,249112,30955°
G 1 1/4ISO 228-1 (BSPP)Zylindrisch41,910112,30955°
G 1 1/2ISO 228-1 (BSPP)Zylindrisch47,803112,30955°
G 2ISO 228-1 (BSPP)Zylindrisch59,614112,30955°
R 1/4ISO 7-1 (BSPT)Kegelig 1:1613,157191,33755°
R 3/8ISO 7-1 (BSPT)Kegelig 1:1616,662191,33755°
R 1/2ISO 7-1 (BSPT)Kegelig 1:1620,955141,81455°
R 3/4ISO 7-1 (BSPT)Kegelig 1:1626,441141,81455°
R 1ISO 7-1 (BSPT)Kegelig 1:1633,249112,30955°
1/8 NPTASME B1.20.1Kegelig 1:1610,287270,94160°
1/4 NPTASME B1.20.1Kegelig 1:1613,716181,41160°
3/8 NPTASME B1.20.1Kegelig 1:1617,145181,41160°
1/2 NPTASME B1.20.1Kegelig 1:1621,336141,81460°
3/4 NPTASME B1.20.1Kegelig 1:1626,670141,81460°
1 NPTASME B1.20.1Kegelig 1:1633,40111,52,20960°
1 1/4 NPTASME B1.20.1Kegelig 1:1642,16411,52,20960°
1 1/2 NPTASME B1.20.1Kegelig 1:1648,26011,52,20960°
2 NPTASME B1.20.1Kegelig 1:1660,32511,52,20960°
M8×1ISO 261Zylindrisch8,000—1,00060°
M10×1ISO 261Zylindrisch10,000—1,00060°
M12×1.5ISO 261Zylindrisch12,000—1,50060°
M14×1.5ISO 261Zylindrisch14,000—1,50060°
M16×1.5ISO 261Zylindrisch16,000—1,50060°
M18×1.5ISO 261Zylindrisch18,000—1,50060°
M20×1.5ISO 261Zylindrisch20,000—1,50060°
M22×1.5ISO 261Zylindrisch22,000—1,50060°
M25×1.5ISO 261Zylindrisch25,000—1,50060°
M27×2ISO 261Zylindrisch27,000—2,00060°
M8ISO 261 (coarse)Zylindrisch8,000—1,25060°
M10ISO 261 (coarse)Zylindrisch10,000—1,50060°
M12ISO 261 (coarse)Zylindrisch12,000—1,75060°
M14ISO 261 (coarse)Zylindrisch14,000—2,00060°
M16ISO 261 (coarse)Zylindrisch16,000—2,00060°
M20ISO 261 (coarse)Zylindrisch20,000—2,50060°
M24ISO 261 (coarse)Zylindrisch24,000—3,00060°
7/16-20 UNFSAE J1926 (-4)Zylindrisch11,112201,27060°
9/16-18 UNFSAE J1926 (-6)Zylindrisch14,288181,41160°
PG 9DIN 40430Zylindrisch15,200181,41080°
PG 11DIN 40430Zylindrisch18,600181,41080°
PG 13.5DIN 40430Zylindrisch20,400181,41080°
PG 16DIN 40430Zylindrisch22,500181,41080°

↑ ↓ wählen · Enter öffnen · Esc schließen